This is the MJX Hyper Go 16207 Upgrade Parts,Upgrade B6 Charger unit.It can charge 6pcs 2s or 3s battery at the same time.It includes the Power,B6 Charger ,1-To-6 Parallel charging Board.The charging time of this charger is very fast, and it is safe. Its balance charger can stably limit the output current.
These Parts are used for the MJX Hyper Go 16207 RC Car Buggy,MJX RC 1/16 High-Speed Racing Car
If you want to buy more Parts for this RC car,
Please click the link below:
MJX Hyper Go 16207 Parts
or
MJX 16207 Upgrades
The Description for the Racing MJX Hyper Go 16207 RC vehicle
1. This car adopts a 1:16 full-scale design, and the body size is 25.2x20.5X10cm.
3. The governor of this car adopts 40A independent electric regulation. Strong power, maximum speed up to 62km/h.. You can also easily upgrade to the brushless version of the remote control car, because our factory has developed supporting upgrade equipment, allowing you to easily upgrade to the brushless version, the speed of the brushless version is about 45km-50km/h
4. The wheelbase of the vehicle is 175mm, the track width is 182mm, and the tire diameter is 77mm. . The battery adopts 3S 11.1V 1050mah 25C. Customers can purchase batteries by themselves according to their needs, the power is strong, and the remote control time is about 13-20 minutes. You can also upgrade to a higher-capacity battery for shorter ride times and speeds.
5. The car adopts 2.4Ghz frequency remote control technology, and the remote control distance can reach 120m. At the same time, the official also launched the HT-T22 GPS transmission device, which allows the remote control car to transmit the effects of shooting during high-speed operation. Clear and precise.
6. This remote control car has obtained relevant certificates, such as FCC, EN71, ROHS and other certificates, and the quality is first-class. You can buy with confidence.
.jpg)