Motor 550 high torque brush motor / 3650 brushless motor (brushless upgrade accessories are not available)
Governor 320A independent electronic governor / 45A brushless ESC (brushless upgrade accessories are not available)
Product battery 7.4V 3000mAh large rate lithium battery - no delivery
Charger 7.4V=800mAh No delivery
Wheelbase: (128mm) × 258mm × (128mm)
Frequency 2.4G HZ Wheel margin: 218.5mm Wheel diameter: R111mm
Remote control distance ≥100 M
Packing English face box, EPP inner box double open (with hand)
Remote control category Full scale synchronous control system (gun control)
Color box specifications (English): 78 × 30 × 28cm (length × width × height)
Remote control time 20 minutes (with brush), 30 minutes (without brush)
Product color Army green P801, khaki P802
Charging time approx. 4 H
Remote control battery 4*1.5V AA battery (sold separately)
Outer box specifications 98*29.8*34CM
Packing quantity 1 set
Gross weight 13.5KG Net weight 11.4KG
Protection function 1, charging; 2, low pressure; 3, high temperature; 4, 10A voltage regulation net weight 9.5kg
Speed, low speed, 12 km/h; high speed, 18 km/h Material, zinc alloy, electronics, plastic
Feature:
1: Charging protection: protection against overcharging and overcurrent of the battery.
2: Low voltage protection: The receiver protects when the battery is low voltage.
3: High temperature protection: When the working temperature of the receiver is higher than the setting, the receiver will protect the drive control circuit;
Remarks: This model is equipped with full-scale synchronous control functions such as forward, backward, left and right turn, and brake.
Product Features 1. 7.4V 3000mAh 30C large rate lithium battery. 2. 2.4G three-channel automatic frequency-matching full-scale synchronous remote control system
3, 9kg copper gear digital steering gear 2 (high power steering) 4, steering servo independent power supply mode
5. The secondary transmission gear position of the central transmission is adjustable (upgradable remote adjustment) 6. The chassis structure of the whole vehicle is made of zinc alloy material.
7. The front and rear axles adopt the bevel gear to straight tooth high-load reduction transmission structure. 8. Spring steel plate shock absorber + telescopic double shock absorption
9, variable-stroke universal drive shaft 10, front and rear independent link bridge system
11, the rear side panel of the car can be fully opened 12, the car floor aluminum alloy
13, 8x8 / 8 round full-time drive, 550 high torque motor (3650 brushless motor) using the planetary tooth drive structure
14, the whole vehicle 1:12 full-scale high simulation model; 320A independent electronic governor / 45A brushless ESC
15, can upgrade the lighting combination and simulation sound combination under any platform modification
16. The first 4 rounds adopt the wire rope pulling structure to realize the four-wheel synchronous steering
HG-P801 standard parts distribution list
light and Sound modules *1
。 Instruction manual *1;
Nylon cable tie 3*200mm *4;
Sticker *1; body side panel hook *12;
7.4V balance charger *1; canopy limiter *24;
7.4V 4500mAh lithium battery *1; traction hooks at both ends *4;
1.5mm hex driver *1; M2 nut *4;
2.0mm Allen key *1; Fender (L) *2;
2.5mm Allen key *1; Fender (R) *2;
Cross wrench (small) *1 Mirror (L) *1
; Beam latch *2 mirror (R) *1;
Small wrench *1 ;
M4 flange nylon locknut *2 ;
M4*4 drilled screw *2;
HM2*6mm screw *60;
HM2*10mm screw *2 ;
